RSS_user
05-04-2010, 05:00 PM
Posted by: achim18
Description: The yacht is a kutter rigged sloop made of steel and was built in 1989 in New Zealand. She is slim cut and was specifically designed for a small crew.The owner of the yacht has seen first in 1993 in Auckland. When you walk through the marina lot to the current owner of the ship immediately. The builder and former owner, the Swiss Roger Margot, who was on board and showed the current owner the ship. who was immediately enthusiastic. The boat is very solid built. After two days, it was agreed between the owner and owner an oral right of first refusal on the boat.Four months later bought the owner the yacht in New Zealand. The yacht was then transported by container ship to Genoa until 1999, and sailed in the Adriatic. From 1999, the yacht is on a voyage around the world.Built by: Gallagher Shipyard, Auckland New ZealandType: Margot 43Material: Shipbuilding steelLength: 13 m (43 ft)Beam: 4 m (13.1 ft)Draft: 2 m (6.5 ft)Built: 1989Ballast: 6 TonsTotal Weight: 20 TonsLocation: Langkawi MalaysiaTotal Refit 2007 in Phuket:Interior completely re-varnished Deck sanded, primed with 8 coats of epoxy and painted with 4 coats of AWL- Grip New deck “non-slip” (Fiberglas Anti-Slip), Cushions new including covers, New engine (Yanmar 110 Hp Turbo) New shaft, new propeller etc.Sails and Rigging * Main: 40 sq m (430 sq ft ) fully battened with three reef points * Genoa: 55 sq m (592 sq ft) Profurl LC 42 reef furling system * Cutter sail: 15 sq m (161 sq ft) Profurl LC 42 reef furling system * Spare main, genoa, storm headsail (red never used). Second forestay, attached, ready to use. * Boom with a Wälder boom stopper, two spinnacker poles on a mast slide system. * Mainsail reefing via lazy jacks into a tarpaulin bag.
Boat Loans By Excel Credit. (http://www.excelcredit.com)
More... (http://www.boatloco.com/boats/forsale/showproduct.php?product=1918)
Description: The yacht is a kutter rigged sloop made of steel and was built in 1989 in New Zealand. She is slim cut and was specifically designed for a small crew.The owner of the yacht has seen first in 1993 in Auckland. When you walk through the marina lot to the current owner of the ship immediately. The builder and former owner, the Swiss Roger Margot, who was on board and showed the current owner the ship. who was immediately enthusiastic. The boat is very solid built. After two days, it was agreed between the owner and owner an oral right of first refusal on the boat.Four months later bought the owner the yacht in New Zealand. The yacht was then transported by container ship to Genoa until 1999, and sailed in the Adriatic. From 1999, the yacht is on a voyage around the world.Built by: Gallagher Shipyard, Auckland New ZealandType: Margot 43Material: Shipbuilding steelLength: 13 m (43 ft)Beam: 4 m (13.1 ft)Draft: 2 m (6.5 ft)Built: 1989Ballast: 6 TonsTotal Weight: 20 TonsLocation: Langkawi MalaysiaTotal Refit 2007 in Phuket:Interior completely re-varnished Deck sanded, primed with 8 coats of epoxy and painted with 4 coats of AWL- Grip New deck “non-slip” (Fiberglas Anti-Slip), Cushions new including covers, New engine (Yanmar 110 Hp Turbo) New shaft, new propeller etc.Sails and Rigging * Main: 40 sq m (430 sq ft ) fully battened with three reef points * Genoa: 55 sq m (592 sq ft) Profurl LC 42 reef furling system * Cutter sail: 15 sq m (161 sq ft) Profurl LC 42 reef furling system * Spare main, genoa, storm headsail (red never used). Second forestay, attached, ready to use. * Boom with a Wälder boom stopper, two spinnacker poles on a mast slide system. * Mainsail reefing via lazy jacks into a tarpaulin bag.
Boat Loans By Excel Credit. (http://www.excelcredit.com)
More... (http://www.boatloco.com/boats/forsale/showproduct.php?product=1918)