Denny's latest activity

  • Denny
    Denny replied to the thread 1999 Chaparral 2135 SS.
    I think that we have the same shifter. On the front of the cover there is a small black button, if you push it in it will let you lift...
  • Denny
    Denny replied to the thread 99 sunesta 233 speedo issue.
    Does your speedometer work with a water pick-up mounted on the transom?
  • Denny
    Denny replied to the thread 1999 Chaparral 2135 SS.
    Dan, it sounds like you need to take off the cover on the shifter and tighten the 4 screws that hold it down, it should not slide around.
  • Denny
    Denny replied to the thread 1999 Chaparral 2135 SS.
    I am presently going through the same issue with my 1985. All cables are perfect, there is what is called a momentary switch, that when...
  • Denny
    Denny replied to the thread Need instrument panel diagran.
    If you can't find a diagram, you may have to physically trace each wire, see where it goes and label it.
  • Denny
    Denny replied to the thread Need instrument panel diagran.
    If you go to a chap dealer and their parts dept they should have a mechanics diagram of it. I do that with Mercruise all the time. Your...
  • Denny
    Extra caution today out on the water, do not overload, safety first.
  • Denny
    Denny replied to the thread Need instrument panel diagran.
    Call Chap, or check with a Chap dealer parts dept, they may be able to help.
  • Denny
    Denny replied to the thread Starting issue a couple times.
    Yes, you could be loosing ignition power somewhere. As you said,I would try a new switch. I love shakedown cruises, you will always find...
  • Denny
    Denny replied to the thread Starting issue a couple times.
  • Denny
    Denny reacted to Barry H.'s post in the thread Starting issue a couple times with Like Like.
    Yes all that has been replaced, I’m thinking it could be the ign switch. Like I said it fires right up but as soon as I let go of the...
  • Denny
    Denny replied to the thread New member.
    My trailer is an EZ Loader. When I redid mine, I shopped quality, so I contacted EZ Loader, and bought original equipment. The outside...
  • Denny
    Denny replied to the thread New member.
    I love rollers, you get her lined up in that 1st set of rollers (even if she is sideways) and she will walk right up.
  • Denny
    Denny replied to the thread Body Of Water.
    Welcome aboard
  • Denny
    Denny replied to the thread New member.
    Doc has it right, that will be a good starting point. That is how I do mine. My fender tips are about even or about 1/2 in. under the...
Top