Search results

definitely a bearing squel unless you mean the rumbling sound. That might be the gimbal bearing

plagues by no pickup, stalling, and you have tried all the normal items, then you might also have this Today, 04:51 AM...

Welcome Randy,

https://www.amazon.com/Dorman-90449-Distribution-Repair-Plate/dp/B00BQAJNWO/ref=sr_1_1?dchild=1&keywords=4.3+distributor+repair+plate&qid=1627225916&sr=8-1

GM K1500 parts work too

Rebuild not replace https://www.topflightautomotive.com/products/corvette-stainless-steel-brakes-1963-1982-chevrolet-corvette-power-steering-control-valve-rebuilding-kit/

Welcome Cyclops2

?Trim tabs, Bennet or Lenco

pull the drive, pull the engine, reinstall the drive, plug Y pipe, drop in water

Are you sure it actually is the seal?

And also a very safe boating 2021 season

Doc, been watching the Q also and see that the ones with less than 5 posts are rejected as spammers. I`m back and forth between both sites so I`ll keep an eye open

Welcome Aboard

Welcome Aboard

And make sure you have the correct amount of them. Protect everything. On the 28 Coasatal I take care of there are 2 on each shaft, 4 inch on the rudders and 3 inch on the trim planes and a underwatwer bonding plate was also installed. If a twin, make sure both motors are bonded together. Dont...

part numbers and crossover listing https://www.eastmarine.ru/incp/katalog/sierra/i_o/MERCRUISER/drive_system.pdf

Welcome to the site.

https://www.mercurymarine.com/en/us/documents/installation-drawings/?category[]=inboard-and-sterndrive