Search results

This is what starboard is good for. Cut it, use a router to to trim the outer edges and drill holes as needed.

Look at Fusion Marine. A little pricy, but will worth it.

IF you can reach the drain plug!?!? Why not attach a drain hose with a plug at the end? Than you could pull it out though the boat's drain plug and its now hanging out side the boat. No pump needed and any mess is outside. Just a thought?

Just an FIY if you will........ In rough seas, I used a clam cleat. https://defender.com/en_us/clamcleat-cl204-mini-nylon-clamcleat-002040-1 As the boats bow goes down, I would pull on the line and jam it into the cleat. Than the boat would go up pulling the anchor. So the cleat took the...

Starboard is cut and shaped as if you were working with wood. Great for boats. https://www.boatoutfitters.com/material/plastic-sheet/king-starboard#:~:text=King%20Starboard%20has%20become%20the,variety%20of%20other%20marine%20products.

Look at starboard. It tools like wood.

If it was me........ I would mount it in front of the compass. And not spend the extra money on someone re-doing the helm. You may want a bigger boat, I did! On my last boat I went with a two 7" screens. A little bigger boat, a Sig 290. But I get it have a bigger screen.

a windless is a great thing.

I would look at a Rocna or a Fortress anchor. Both have great holding power and will set quickly. The Rocna will hold even if your boat does a 180 turn were others will pull out. The Fortress is is light and easy to store and great for soft bottoms. The Rocna is good for all kinds of bottoms. I...

You could have poured water into the drain and see where it was coming out. A few drops of food coloring can help too. Just trying to be helpful...

Depending on how low the inside drain is. You could install a check valve.

Keep in mind that the op might have a no maintenance and other wise known as a sealed battery. You can always do a load test. A load tester range from $25 to $200. I bought a in the range of $60 off amazon with good reviews. At the start of every season, I would do a load test. After I blew...

If it was me? I would go over all the wiring under the helm. The boat is now 16 yrs old. With that said, something could be loose and and you might have some corrosion building up on the connections and the wires. My own boat is 23yrs old. At times I had to cut the wire back due to the...

I bet that's a $200 to $300 part. It can get out of hand at times.

Simrad, a very good choice. I would use 3M's 4000 fast cure caulking.

I would make one out of starboard.

I would take the old one off and match it to one from an auto store. It would be cheaper and faster.

Yes, Happy Fathers Day!!

You need a bigger Marina or club.:smile4:

If your up north, what you don't want is the water to freeze. That would only damage the glass inside.