Search results

This is all that I found. I would call one of the surf boat manufacturers. The surf boat ramp control switch operates the mechanisms that facilitate the launching and retrieval of boats at a surf boat ramp. Functionality: Launch Control: Activates the ramp to lower or extend, allowing boats...

Either the port or starboard side as far away from the center prop wash bubbles as possible, or you can put a thru hull unit in.

For the trailer, I would call Chap 1st to see if they have any recommendations. No matter which trailer you get it will have to be fitted to your hull. Also you an ask them about your cockpit cover. Is your carpet glued in, or does it snap in?

My choice would have it made at a good marine canvas shop. They have the knowledge and the tools to do that kind of work, and make it look like it came with the original Bimini. The only thing that we did not do was to add the white trim.

Ok ,great. #1 If this were me, I would not touch the rear roller, that controls how the boat starts up on the trailer. If you move it up that it means that the trailer is higher out of the water, because that is your starting point. Take your jack and put it under the metal frame work that the...

Do you have a jack of some kind that you can use to put under the front roller that is under the boat?

How many rollers do you have? When you reach the winch does the bow lift up, and how much?

Looking at the pictures in both of your posts, I believe that the purpose of rollers is to give the bow something to ride on while your girl is being launched and retrieved. I don't see any rollers in front of the bunks, so that tells me that all of the support is from the bunks. No matter what...

Pretty girl!

It looks like you have 2 bunks on each side, one long and one short?

Also, is that the original boat and trailer unit? Maybe it had a different boat that set deeper and touched the rollers. Getting something used can be difficult figuring the in's and out's of it.

With only 2 bunks, you might want to raise the rollers for stability. For me, I would contact the manufacture and see what they recommend. If that is their design , they did it that way for a reason.

It depends on if you need them for support. If not, then they are used for making your girl easier to launch and retrieve. Do you have a photo of your bunks, I'm assuming that you have bunks.

Glad you are doing better. I remember my old Schwinn bike had a seat about the size of a motorcycle seat. They don't make a seat big enough for me to even think about riding a bike again. Lol

Welcome to the world of stupid. A lot of your home sinks are put together that way. Nothing today is designed to be repaired. Glad you were able to figure it out.

Dark red and black carpet and 90' temp does make it a little toasty.

Mine too, that is why I wear shoes. LOL

nice touch

https://r.search.yahoo.com/rdclks/dWU9YTdxbGtmcTU3dGNxbyZ1dD0xNzQ2NzU2MTc1MDYzJnVvPTc4ODIxMjg0Mzc3NjIzMiZsdD0yJnM9MSZlcz15a3pjNmc1OC42TGZ2QUJnd0RJODZvNVZsb3A1dHdxQ1JjRFh3WG9PdFlqeFRyMlF2RXJkLnhmOF9oeVZhc2p0YkhsVUFLTHprUmJGZHctLQ--/RV=2/RE=1749348175/RO=14/RU=https%3a%2f%2fwww.bing.com%2faclick%3f...

Who made the one that you now have? You may not find the original, your girl is 14 years old. Over the years I have replaced 2 of them. And neither looks like the original. You may have to settle for one that just looks nice. Cecil is a good start.