Search results

what is " It’s a little work but not hard to pull the tuner back "

Someone was looking for a replacement bulb for the bow light. It is a very odd size. This place has the bulb, green/red lens, and complete pop up assembly. Would have posted sooner but took me awhile to find it again. https://www.boatoutfitters.com/electrical/lighting

I found the plug in the port rear corner. And it had a weather cap on it, not a terminator. I installed a yellow terminator on the VV pigtail and everything worked! And my tach stopped bouncing too!. Gauge reads higher than VV and I will trust VV

OK, if that's what you like. In my mind if the pressure drops quickly I want to know immediately.

Great! thanks much

Why do you value Oil Temp over Pressure?

Does anyone know the size of the fuel tank on a 2005 256 SSI with 5.7 MPI MAG engine? I have searched and can't find this in any doc I have or the internet.

Success!! My is engine 2005 5.7 Mag MPI There was a purple weather cap on the SmartCraft port rather than a terminator. Plugged my VV into that plug and a yellow terminator I bought into the pigtail and all worked. Now I have to figure out how to use it. The primary items I am looking for is...

Do you have contact info for Arnie? I cannot find the correct connector to plug the VV into

Would you share the contact info for Mercury?

I am trying to install VesselView in my 06 256SSI with 5.7 Mag MPI but cannot find the connector to plug into. Any know where it is? I found a connector labeled CAN on the port rear corner but it did not have either red or yellow terminator and only had 5 wires . VV has 6. any ideas??

And there it is! Thanks

Well I have a 2005 and it says with Smartboat on spark arrestor cover. What did you get? Just the mobile app or did you need the Vessel View Link? what hardware is required?

What year / model engine do you have?

Thanks. I will check

Thanks. I had not seen on trailer but will look when it is up on lift

I have a new to me 2006 256ssi. Where is the depth finder transducer located?

I have a new to me 2006 256SSI My tach is bouncing all over the place. Where to start trouble shooting? Thanks in advance