Latest activity

Starting to warm up a little. Day temps around 65 so nearly time to apply the antifoul and relaunch the boat.Temp will slowly creep up...

Starting to warm up a little. Day temps around 65 so nearly time to apply the antifoul and relaunch the boat.Temp will slowly creep up...

Look for an inline fuse, start at the pump, that is where I found mine.

I would copy down your hull ID number and call Chap with it, maybe they will have the info you need. Ya, pictures don't lie, got a few...

2016 Chaparral H2O 21 with a mercruiser inboard. I took the throttle handle apart to check the switch itself, but there was nothing...

Designed and made this to safely remove the oil line at the transom and gimbal housing IF the oil line is very old cut it in half first...

I understand what you are saying. However that is a picture of the engine that's in the boat. That was why I was asking for engine...

They did not list any other motor in the brochure, just those 2.

Hi there Denny and thanks for the help, As referenced in this pic, it's an inline 4 cylinder:

It is gas powered. Chap listed a 4.3 L V6 and a 5.0 L V8 For that model and year in an archives brochure. Count the number of spark...

Nice. And your boating season is just starting isn't it? How long is your boating season? So many are going to outboards instead of...

This is my first post on here, all the way from Auckland New Zealand. I thought you may be interested in my 2006 Signature which has had...

This is my first post on here, all the way from Auckland New Zealand. I thought you may be interested in my 2006 Signature which has had...

I would start with the back or the inside of your breaker panel. And see if something doesn't look right. As Iggy says, and I have...

I would look for a short in the harness than. If that fails. New wiring then. It's a simple install.