Recent content by dflaherty10912

That is a nice looking dash. There are custom dash stores that could help you with this, albeit it could get pricey. Get several opinions/options on how they would proceed with the integration. This could give you some ideas. My goal was to have a factory look. I did weeks of research, for...

Thank you!

I did the install. The year is 2016. The Simrad is on the smartcraft network coupled with Mercury vessel view, Mercury auto trim, Lenco auto glide and a xSonic SS75M Thru-Hull Medium CHIRP Transducer. I also installed bow cameras that are linked to the Evo3.

Sunesta 264 with NSS Evo3 9"

Thanks Phillbo for you reply. The Mercruiser mechanic checked the boat out today. The mechanic says the noise is the new OEM lower unit he installed. Mechanic believes the tolerances were off from the factory. Interesting thing was that it took a while to reproduce the sound. It was determined...

Hey guys I would appreciate your advise on what is causing this sound. Bravo 3x, MerCruiser 8.2 I hit some rocks with the lower unit and propeller. Mechanics inspected transom by removing engine, transom plate and sterndrive. A new lower unit and propeller was installed and everything put back...

It was the 90 amp fuse. After replacing the fuse (not an easy task) everything works properly.

I have a 2016 mercruiser 8.2L. Turn the ignition key, no dash lights and engine does not get power. I am getting clean power to the ECM. Things I have checked. 14 pin connector (engine side - no volts), 50 amp fuse (power in and out no volts). The only thing I can think of is the 90 amp on...

Thanks for your input Doc, that definitely works!

I'm hoping someone can tell me the best location for a subwoofer (JL Audio m6 10") that I recently purchased for my 2016 Sunesta 264. The options that I see are the front side of the port storage bin behind the passenger seat, the front side of the starboard ice chest storage area behind the...

I have a 2016 8.2 mag. I installed Vessel View behind the electronics in the helm to provide data using NMEA2000 to my Simrad Evo 3 9" display. Now, so much data available to read and it was easy to install. I especially like knowing important engine details at a glance, and know what my...