Search results

pictures below first messages are responded to in order

Will be posting a large list of items for sale , Check back in a few days Bt Doctur

Currently have in the works a fitting to replace the gear lube monitor no longer available.Used on MC1, Alpha1, alpha GEN II without the dribble valve assembly With this redesign you will be able to use a trim pump hose , the lube res bottle from the GEN II or Bravo,bracket i will supply the...

Designed and made this to safely remove the oil line at the transom and gimbal housing IF the oil line is very old cut it in half first then when gimbal housing is removed use tool to remove the oil line at the transom. Designed to cut on the upstroke 1/4 SS rod heated and hammered into this...

Cant remember if I posted this before shift cable thread insert repair...

https://i.ibb.co/S47BkhDL/DSCN2237.jpg https://i.ibb.co/Y7LWGN4b/DSCN2238.jpg https://i.ibb.co/GQt4h8n2/DSCN2239.jpg https://i.ibb.co/TBRz0Ktp/DSCN2240.jpg

A minor flaw in there design of coil mounting at the rear of an engine. Water from washing,wave action ,rain,etc that get on the coil starts to rust and swell the lamination's resulting in a no spark condition. Should this happen inspect the steel lamination's for rust and swelling. Any GM coil...

are your filters in the carb and vst clogged with a powder type substance? Thread starter Bt Doctur...

From inner race to housing

Some Captains refuel and simply turn on the blower without checking the bilge and start the engine . Some hatches/rear seating are a bear to manually open to check for a fuel issue so there never lifted. A simple trick is to turn on the blower and sniff the air leaving the bilge for the presence...

Customer buys a ProTorque starter from a dealer, does not come with bolts. I go to the same store and ask for the starter bolts for ProTorque starter. I get 10-806343 2. Install the first bolt and the starter is a bit loose.Verify the same with the second bolt. Only recourse was to add a...

You should check your bilge before starting after fueling. at the very least sniff the air coming out of the blower hose

THe mercruiser water sep housing will accept the Yamaha 10 micron tall spin on

An overlooked item is the water inlet hose from the outdrive. It can kink and restrict flow. On Bravo `s its called "Bravoitis" where the internal fitting is crushed closed by corrosion.

It appears that the chaparral site is now gone so if you see your friends someplace else tell them where we went.

Cant get on, looks like it is down. Their Facebook site is still there

From the Coast Guard https://lightedmag.com/u-s-coast-guard-issues-warning-about-led-lights/

plagues by no pickup, stalling, and you have tried all the normal items, then you might also have this Today, 04:51 AM...

https://www.amazon.com/Dorman-90449-Distribution-Repair-Plate/dp/B00BQAJNWO/ref=sr_1_1?dchild=1&keywords=4.3+distributor+repair+plate&qid=1627225916&sr=8-1