If you choose to use the 1Qt bottle method instead of the pump kit get 2 Qts of oil and the tapered nozzel you find on gear lube bottles. fill to the very top container 1 with 2nd bottle.Insert into drive and squeeze as much as possable.remove bottle 1 and pour contents into bottle 2 to the top.(no air pocket). Squeeze 2nd bottle to expell any air, insert into drive, squeeze untill it comes out the top hole.Install plugs.
Pump Method
Pump slowly so as not to introduce air bubbles,transfer pump to 2nd bottle before you empty 1st bottle.Continue pumping slowly till it comes out the top hole.
If you pump enough bubbles, you will have a false "Full" reading leaving your wallet hurting.
Pump Method
Pump slowly so as not to introduce air bubbles,transfer pump to 2nd bottle before you empty 1st bottle.Continue pumping slowly till it comes out the top hole.
If you pump enough bubbles, you will have a false "Full" reading leaving your wallet hurting.
Last edited: